|
|
PRO-SHOCK FAQ's
The ULTIMATE by: PRO SHOCKS
The entire line of aluminum PRO SHOCKS is now elevaed to become the ULTIMATE SHOCK. All ULTIMATE Pro shocks are serial numbered and dyno tested. Each aluminum ULTIMATE Pro shock comes with a serial numbered dyno graph. THe proof of quality and superiority is packaged with each ULTIMATE Pro Shock.
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
WB |
SB |
Pro Gas |
A |
ASB |
AC |
A & AC |
A & AC |
ASB & SBA |
Q: How do I know which Pro-Shock part number is right for my car and track conditions?
A:Call or E-Mail Pro-Shocks for more help talk to one of our tech-service representatives. Don't forget to look for the technicians at trade shows and many races throughout the country.
PART NUMBER ANALYSIS
STEEL SHOCKS & STEEL TAKE APARTS EXAMPLE TA9500 - The first digit is a (9), meaning the stroke is 9" long. The second digit is a (5), meaning the valve code is a 5 on both compression and rebound. When the third digit is something other than a (0), the second digit applies to compression only and the third digit then applies to rebound valve code only. For special valving, use the steel take apart (CTA).
PRO-LITE ALUMINUM SHOCKS
- Same as above with exception of adding an "A" before the number and deleting the last digit "0". For threaded body shocks use "AC" before each part number.
- "AC" Aluminum Shocks: Example AC76B- The first digit is a (7), meaning the stoke is 7" long. The second digit is a (6), meaning the valve code is a 6 on both compression and rebound. If there is a third digit such as in AC763B, the second digit applies to compression only and the third digit applies to rebound valve code only.
- Adjustable "A" and "AC" Shocks: Example: A or AC953-8B-The first digit is a (9), meaning the stroke is 9" long. The second digit is a (5), meaning the valve code is a 5 on compression. The third and fourth digits indicate the adjustment range on rebound only.
- Double Adjustable "A" and "AC" Shocks: Example A or AC937/38B. The rebound setting is the same as the one of the Rebound Adjustable. The last 2 digits are compression.
SB SERIES PRO SHOCKS "SB" refers to small body (1.63" OD) design. First digit is the stroke in inches, and second digit is the valve code designation.
ASB & SBA SERIES PRO SHOCKS Aluminum threaded small body (SB) shock. Simply add an "A" to the"SB" numbers = ASB.
Aluminum smooth small body (SB) shock. Simply order "SBA" non coil-over.
WB SERIES (non coil-over) PRO SHOCKS "WB" refers to the welded-on bearing mounting ends (non-removable). First digit is stroke in inches , and second digit is valve code designation.
PG SERIES (Pro Gas) PRO SHOCKS
All Pro Gas Series shocks use take apart analysis!
ALL PRO-SHOCKS ARE OF A GAS CELL DESIGN AND CAN BE RUN UPSIDE DOWN TO REDUCE UNSPRUNG WEIGHT All Aluminum big body shocks are available with aluminum shafts at no extra cost.
Also available are 6" shock bodies with 7" shafts.
Custom valving charges applyALL ALUMINUM SHOCKS COME WITH BOTH ENDS !
